IMI Norgren

Norgren Manifolding Pressure Regulator

- Excelon design allows in-line or modular installation with other 72, 73, and 74 Series products.
- Balanced valve design minimizes effect of variation in the inlet pressure on the outlet pressure.
- Standard relieving models allow reduction of downstream pressure when the system is dead-ended. Non-relieving models optional.
- Push to lock adjusting knob with tamper resistant accessory.
- High flow capacity with full flow gauge ports.
- Manifolding models typically allow up to six regulators to be connected without a booster signal.

 

Part Number
PSIG
OKCancelClear All
PORT SIZE PTF
OKCancelClear All
R72M-2AK-RFG
5 to 60 psig
1/4"
R72M-3AK-RFG
5 to 60 psig
3/8"
R72M-2AK-RMG
5 to 150 psig
1/4"
R72M-3AK-RMG
5 to 150 psig
3/8"
Part Number
TYPE
OKCancelClear All
4381-500
Relieving
4381-501
Nonrelieving
OPTIONS

Change model numbers as follows:

  T-Handle Adjustment: Use T in the 7th position.
  Non-Relieving Regulators: Use N in the 8th position.
  Regulators w/o Gauge: Use N in the 10th position.

TECHNICAL DATA / SPECIFICATIONS

Fluid: Compressed Air

Maximum Pressure: 300 PSIG

Operating Temperature: 0 to 150 Degrees Fahrenheit

Note: Air supply must be dry enough to avoid ice formation at temperatures below 35 Degrees Fahrenheit.

Dimension in Inches:

  Panel Mounting Hole Diameter: 1.57"
  Panel Thickness: 0.16" Maximum

Note: Approximate flow of 75 SCFM at 150 PSIG inlet pressure, 90 PSIG set pressure and a drop of 15 PSIG from set.

Gauge Ports: 1/8" PTF

MATERIALS OF CONSTRUCTION

  Body: Zinc
  Bonnet: Acetal
  Valve: Brass
  Elastomers: Nitrile
  Bottom Plug: Acetal
https://catalogs.jhf.com/Pneumatic-and-Hydraulic-Equipment/697/