IMI Norgren

Norgren R24 Micro-Trol Special Purpose Regulators

- Unique design provides fast response and high-flow capacity.
- Exceptionally high relief flow.
- Fingertip pressure adjustment
- Adjusting knob can be set in the field to stop at some maximum or minimum pressure setting.
- Full flow gauge ports can be used as outlet ports or gauge ports, permitting manifolding or right-angle piping.
- Balanced valve minimizes effect of variations in inlet pressure on outlet pressure.

*Do not use these regulators to control pressure outside of the specified ranges.

Part Number
TYPE
PORT SIZE PTF.
PSIG
R24
1/4
5 to 60 psig
3/8
5 to 60 psig
1/2
5 to 60 psig
R24
3/4
5 to 60 psig
R24-800-RGFA
1
5 to 60 psig
R24
1/4
10 to 125 psig
3/8
10 to 125 psig
1/2
10 to 125 psig
R24
3/4
10 to 125 psig
1
10 to 125 psig
1-1/4
10 to 125 psig
R24
1/4
10 to 250 psig
3/8
10 to 250 psig
1/2
10 to 250 psig
R24-800-RGSA
1
10 to 250 psig
R24-A00-RGSA
1-1/4
10 to 250 psig
Part Number
TYPE
18-021-006
Temper resistant cap
Mounting bracket
Plastic mounting nut
2962-04
Metal mounting nut
Part Number
TYPE
Regulators with 1/4", 3/8", 1/2" ports
Regulators with 3/4", 1", 1-1/4" ports
OPTIONS

Change model number as follows:

Regulators w/o a Gauge: Use N in the 8th position.
5 to 30 PSIG Adjustment Range: Use C in the 9th position.

SPECIFICATIONS

Fluid: Compressed Air

Maximum Inlet Pressure: 300 PSIG

Temperature Range: 32 to 175 Degrees Fahrenheit

Note: W/ dewpoint of supply air less than air temperature below 35 Degrees Fahrenheit.

Gauge Ports:

  1/4" with 1/4" Main Ports
  3/8" with 3/8" Main Ports
  1/2" with 1/2", 3/4", 1" or 1 1/4" Main Ports

Type: Piston, Relieving

MATERIALS OF CONSTRUCTION

  Body: Zinc
  Bottom Plug, Pilot Valve and Relief Valve: Acetal
  Adjusting Screw and Main Valve: Brass
  Elastomers: Nitrile
https://catalogs.jhf.com/Pneumatic-and-Hydraulic-Equipment/692/