IMI Norgren

Norgren T-Handle General Purpose Regulators

- Floating valve pin provides more positive seating and greater dependability.
- Large diaphragm provides accurate and quick response to flow demands and line pressure changes.
- Balanced valve minimizes effect of variations in inlet pressure on outlet pressure.
- With standard relieving models, outlet pressure can be reduced even though the system is dead-ended.
- T-handle adjustment standard; handwheel or screw adjustment optional.

* Do not use these regulators to control pressures outside of those specified.

Part Number
PORT SIZE
OKCancelClear All
PSIG
OKCancelClear All
11-002-021
1/4
5 to 50 psig
11-002-045
3/8
5 to 50 psig
11-002-069
1/2
5 to 50 psig
11-002-019
1/4
5 to 125 psig
11-002-043
3/8
5 to 125 psig
11-002-067
1/2
5 to 125 psig
11-002-023
1/4
15 to 250 psig
11-002-047
3/8
15 to 250 psig
11-002-071
1/2
15 to 250 psig
Part Number
PORT SIZE
OKCancelClear All
PSIG
OKCancelClear All
11-002-015
1/4
5 to 50 psig
11-002-039
3/8
5 to 50 psig
11-002-063
1/2
5 to 50 psig
11-002-013
1/4
5 to 125 psig
11-002-037
3/8
5 to 125 psig
11-002-061
1/2
5 to 125 psig
11-002-017
1/4
15 to 250 psig
11-002-041
3/8
15 to 250 psig
11-002-065
1/2
15 to 250 psig
Part Number
PORT SIZE
OKCancelClear All
TYPE
OKCancelClear All
529-03
1/4", 3/8"
Relieving
535-03
1/2"
Relieving
529-01
1/4", 3/8"
Non-Relieving
535-01
1/2"
Non-Relieving
OPTIONS

Change model number as follows:

Handwheel Adjustment: Add -8C to the end of the desired model number.
Screw Adjustment: Add -8B to the end of the desired model number.
Mounting Bracket Assembled to Unit: Add -1A to the end of the desired model number.
Threaded Bonnet for Panel Mounting:
  W/ Handle Wheel Adjustment: Add -2A to the end of the desired model number.
  W/ T-Handle Adjustment: Add -2B to the end of the desired model number.
  W/ Screw Adjustment: Add -2C to the end of the desired model number.

SPECIFICATIONS

Fluid: Compressed Air

Inlet Pressure: 400 PSIG Maximum

Temperature Range: 0 to 175 Degrees Fahrenheit 

Note: With dewpoint less than air temperature below 35 Degrees Fahrenheit.

MATERIALS OF CONTSTRUCTION

  Body: Zinc
  Bonnet: Aluminum
  Valve: Brass
  Valve Seat: Brass
  Elastomers: Nitrile
  Bottom Plug:
    1/4" / 3/8" Ports: Brass
    1/2" Ports: Nylon
https://catalogs.jhf.com/Pneumatic-and-Hydraulic-Equipment/691/